Max Resolution 1050x1050 dpi iScan High Speed Portable Digital Scanner Document Camera
Convinient and efficient office work from now on.
Innovate your scanning.Say goodbye to expensive and traditional scanner
for office use it have small size you can hold use your hand ,double roller design makes it scan more stable.
Low: 300x300 dpi High: 600x600 dpi Fine: 1050x1050 dpi
Mono Low resolution:2.0 Seconds
Color Low resolution:3.0 Seconds
Mono High resolution:6.0 Seconds
Color High resolution:8.0 Seconds
Mono Fine resolution:10 Seconds
Color Fine resolution:12 Seconds
Mono Low resolution 1200pcs
Color Low resolution 1000pcs
Mono High resolution 600pcs
Color High resolution 550pcs
Mono Fine resolution 150pcs
Color Fine resolution 140pcs
A4 Color Contact Image Sensor
480*320 HD TFT LCD
Dimensions (L*W*H) mm
Auto power off
USB 2.0 high speed
Built-in 700mAH Lithium-Polymer
more than 400 piece (A4 paper default, Low resolution with color)
Micro SD Card
USB or 5V DC power
Windows 2000 or above, Mac10.4 or above, IOS, Android(OTG USB)
JPEG PDF-A4 or PDF-Letter scan-format selectable.
Color or Mono scan-color selection.
Scanning resolutions:300/600/1050 DPI selection
Directly save JPG(JPEG)/PDF files to the Micro SD card.
Supports Micro SD card of up to 32GB
Color display to playback the scanned images.
Double Roller design, double roller drive scanning, Scan more stably.
Built-in 700mAH Lithium-Polymer battery.
Bookedge design, get all the book content.
Wireless design, scan picture anywhere and anytime
Driver free to download for MS Windows 8/7/Vista/XP and MacOS10.4 or above
(direct plug-in, driver installation not required)
Notice: At any time, the ICON will display the most closed KEY function.
How to Scan
To scan,make sure your scanner is not connected to the computer.
Turn on your scanner by pressing and holding for 3 seconds.
Hold the document firmly with one hand on a flat surface.
Place the scanner on the edge of the paper to ensure the whole document can be scanned. Make sure to keep the scanning area within the scanning width indicators marked on the side of the scanner.
Hold the scanner flat against the material and then press once to start the scanning process.
Slide the scanner across the document slowly,top to bottom.Keeping your hand stable to get the best picture quality.
During scanning, the scanning status icon will be displayed on the LCD screen to indicate scanning is under progress.
How to Calibrate the Scanner
Note: If you found the scanned images are too dark or too bright, you may need to calibrate your scanner to normal status by following the below steps:
---Wipe off any dirt on the surface of the scanning lens with the clean cloth provided.
---Perform the calibration to adjust white balance following the Calibration Card.
1.Micro SD card not installed.
2.Micro SD card is full
3.MicroSD card not formatted correctly.
1.Correctly install MicroSD card.
2.Download the storage images to PC to release the storage space.
3.Please reading section 3.4
3)After connect with PC can't identify scanner (can't find removable disk)
Solution:Make sure all of the cable link is correct. Or power on PC.
Reason:Dirty of scanner lens
Solution:Use soft and dry cloth to clean lens.
5)The Eexcalmatory mark turn into red during scanning..
Reason:Scan speed is too quickly.
- 1 x Handy Scanner
- 1 x USB Cable
- 1 x CD Software
- 1 x User's Manual
- 1 x cleaning cloth
- 1 x Carry Bag
Notes:our portable scanner accesoory did not including the SD card. Pls buy micro-SD card as memory card before you use it.Support max to 32G extension size.